5 Series E61 520d (M47T2) TOUR
Installation:
Place special tool 61 1 330 on drive of rear window wiper and
close rear window.
Allow journal of wiper shaft bearing to snap into bore (1) with rear
window wiper standing vertical.
Tighten rear window wiper motor to specified torque, tightening
torque 61 62 8AZ
.
RA Removing and installing/replacing rear window wiper motor (Touring)
BMW AG - TIS
26.01.2013 09:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -