bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Left Or Right Rear Light (in Side Panel)|Page 2540 > < 3 RA Replacing Sealing Frame For Left Or Right Rear Light (on Rear Lid)
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (in side panel)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove flap in luggage compartment trim panel on left or

right

Disconnect plug connection (4).

Release nuts (1, 2, 3), tightening torque  63 21 1AZ

.

Installation:

Make sure gap is uniform all round between rear light (5)

and side panel (6).

Observe tightening sequence:

1. 

Tighten nut (1)

2. 

Tighten nut (2)

3. 

Tighten nut (3)

Remove rear light (5) in outwards direction from side panel (6).

RA  Removing and installing/replacing left or right rear light (in side panel)

BMW AG - TIS

26.01.2013  09:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Left Or Right Rear Light (in Side Panel)|Page 2540 > < 3 RA Replacing Sealing Frame For Left Or Right Rear Light (on Rear Lid)