5 Series E61 520d (M47T2) TOUR
Disconnect plug connection (1).
Detach hose (2).
Note:
If firmly seated, gently heat hose (2) on drive unit for lumbar
support (3).
Installation:
Make sure hose (2) is laid without kinks.
Remove drive unit for lumbar support (3).
Replacement:
Pull drive unit for lumbar support (3) out of jacket (4).
RA Removing and installing/replacing drive unit for lumbar support on left or right
BMW AG - TIS
26.01.2013 13:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -