5 Series E61 520d (N47) TOUR
Crank engine at vibration damper in direction of rotation until
screw is visible in opening.
Release all bolts (1) of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 5 bolts.
Tightening torque 24 40 1AZ
.
Remove cable (1) from holders.
Release screws (2).
Remove bracket (3).
Tightening torque 24 00 1AZ
.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 and 00 2 030 .
Tasks are described in Transmission bracket.
Secure transmission on lifter with tensioning strap.
Remove transmission cross-member.
RA Removing and installing automatic transmission (6HP19Z) N47
BMW AG - TIS
30.01.2013 07:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -