5 Series E61 525d (M57T2) TOUR
Remove heat shields (1) and (2).
Unfasten nut.
Disconnect cable (1).
Installation:
Unfasten nut.
Adjust cable by means of holder (2) until spacing A = 1 mm is
obtained.
Tighten nut.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 and 00 2 030 .
Tasks are described in Transmission bracket.
Secure transmission on mount with tensioning strap.
-
Remove transmission cross-member
-
Remove propeller shaft from transmission.
-
Release centre bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
RA Removing and installing automatic transmission (6HP19Z) M57T2
BMW AG - TIS
09.02.2013 18:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -