5 Series E61 525d (M57TU) TOUR
Slacken screws (1) on turbocharger bracket.
Unfasten exhaust turbocharger from exhaust manifold.
Installation:
Replace seal.
Coat threads with copper paste.
Tightening torque, 11 65 1AZ
.
Release screws (3) on cylinder head at rear.
Installation:
Tightening torque 12 52 8AZ
.
Remove all finger rockers (1) and set down in order.
Remove all compensating elements (2) and set down in order.
Important!
Worn rockers may only be reused on the same grooves of the
camshaft.
RA Removing and installing cylinder head (M57TU)
BMW AG - TIS
11.02.2013 07:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -