5 Series E61 525i (N53) TOUR
12 14 523
Replacing pulse generator on inlet camshaft
(N54)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove fan cowl
Unlock plug (1) and remove.
Release screw.
Tightening torque 12 14 3AZ
.
Remove pulse generator (2).
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing pulse generator on inlet camshaft (N54)
BMW AG - TIS
17.02.2013 19:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -