5 Series E61 530i (N52K) TOUR
13 53 240
Replacing complete injection pipe (N52/
N52K)
Special tools required:
•
13 5 281
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove clean air pipe
•
Remove ignition coil cover
Recycling
Fuel escapes when fuel line is detached. Catch and dispose
of escaping fuel.
Observe country-specific waste-disposal regulations.
N52K only:
Unclip plug connection (1) from holder (2) and disconnect.
Unclip wiring harnesses from holder (2) and connector strip (3).
Disconnect holder (2) from injection pipe.
RA Replacing complete injection pipe (N52/ N52K)
BMW AG - TIS
18.02.2013 11:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -