5 Series E61 530i (N52K) TOUR
33 31 000
Removing and installing complete rear axle
carrier
Special tools required:
•
00 2 030
•
00 2 040
•
33 4 232
•
33 4 233
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Remove brake disc on both sides
•
Deactivate and empty air spring system
•
Disconnect handbrake cable on both sides of wheel brake
and remove from hanging hook
•
Remove propeller shaft from rear differential and tie back or
remove completely if necessary
•
M5: Remove rear left and right tension struts
•
Remove cross strut
•
Detach plug connection for pulse generator on both sides
and expose line up to control arm
•
Detach plug connection for brake pad wear sensor on right
and expose line up to control arm
•
Disconnect plug connection on ride height sensors
•
Remove air spring from wheel carrier
•
Remove rear shock absorber on both sides from swinging
arm
RA Removing and installing complete rear axle carrier
BMW AG - TIS
18.02.2013 14:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
