5 Series E61 530i (N52K) TOUR
Important!
Cut outer metal sheet only.
A = approx. 290 mm
Open weld joints in areas (1).
Installation:
Insert reinforcement plate at severance cut.
Apply window glass adhesive to cavity acoustic baffle (2).
Open weld joints in area (1).
Cut wheel arch at distance of 20 mm to radius along line (1).
Preparation of new part:
Mark new part in accordance with severance cut on vehicle +
20 mm extra material and cut.
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
18.02.2013 17:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -