5 Series E61 530i (N52K) TOUR
Version with Soft Close Automatic:
Disconnect plug connection (1).
Unfasten cable tie (2).
Release screw (3) and nuts (4).
Tightening torque 51 22 10AZ
.
Important!
Do not damage door lock seal during removal.
Release screws (1).
Remove door lock (2) from inside.
Important!
To avoid leaking and electrical malfunction:
Pull door lock (2) with special tool into corner (3), see Figs.
R51 3381 and R51 7594.
Installation:
Seal (1) on door lock (2) must not be damaged.
Installation:
-
Install door lock and insert screws (1), do not tighten down.
-
Slide special tool 51 2 190 into opened rotary latch until
latch engages in first stage.
RA Removing and installing/replacing door lock in left or right rear door
BMW AG - TIS
18.02.2013 18:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -