bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Instructions For Automatic Rear Lid Actuation (electrohydraulic_fully Automatic)|Page 1675 > < 1 RA Adjusting Rear Window Lock
Page 1
background image

51 24 ...

Instructions for automatic rear lid actuation
(electrohydraulic/fully automatic)

Important!

When working on the opened hydraulic system: 

Move rear lid into service position

System must not be started up.

Adhere to the utmost cleanliness.

Even the smallest of dirt particles in the hydraulic system can
cause malfunctions. 

If necessary, join hydraulic lines together.

Seal off hydraulic unit.

The hydraulic unit may no longer be activated when the
hydraulic cylinder is removed (cylinder extended).

Piston rod must be protected against damage.

Opening and closing rear lid:

Note:

If a control button is operating again during an opening or closing
procedure, this procedure is stopped. When operated again, this
changes the direction of the rear lid (except passenger
compartment button, opening only here).

Actuation of rear lid is only possible via:

control button in passenger compartment

opening
only

control button on outside of rear lid when
vehicle is unlocked

opening and
closing

remote control button (RCB) on key

opening
only

continuous pressing of RCB on key

closing

control button on pull handle in rear lid trim

closing and
opening

RA  Instructions for automatic rear lid actuation (electrohydraulic/fully automatic)

BMW AG - TIS

18.02.2013  18:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Instructions For Automatic Rear Lid Actuation (electrohydraulic_fully Automatic)|Page 1675 > < 1 RA Adjusting Rear Window Lock