5 Series E61 530i (N52K) TOUR
51 49 022
Removing and installing/replacing side (inner)
panel for rear lid
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove top panel for rear lid
Unclip trim (1) with special tool 00 9 317 from retainers (2) and
remove in direction of arrow.
Installation:
If necessary, detach clips (2) from trim (1) and insert in rear lid.
If necessary, replace faulty clips (2).
Installation:
Guides (1) on trim (2) must not be damaged.
RA Removing and installing/replacing side (inner) panel for rear lid
BMW AG - TIS
18.02.2013 20:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -