bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing Or Replacing Battery|Page 2284 > < 3 RA Removing And Installing Battery Cover
Page 1
background image

61 21 010

Removing and installing or replacing battery

Warning!

Observe safety instructions for handling vehicle battery.

Observe notes on power supply / on intelligent battery sensor
(IBS).

Necessary preliminary tasks:

Disconnect battery negative lead

Disconnect plug connection (1) of IBS cable.

Unscrew nut (3).

Tightening torque  61 21 1AZ

.

Important!

Do not under any circumstances pull/lever safety battery
terminal off by force.

Detach safety battery terminal (2) towards top, lay to one side
and secure.

Release nuts (4) and remove rollover protection (5).

Release threaded pin (1) and remove holder (2).

Detach vent (4) in direction of arrow.

Fold both clips (3) open.

Pull battery (5) back from front fixture and remove towards top.

Installation:

Make sure battery (5) is correctly seated in front fixture.

RA  Removing and installing or replacing battery

BMW AG - TIS

18.02.2013  22:58

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing Or Replacing Battery|Page 2284 > < 3 RA Removing And Installing Battery Cover