5 Series E61 530xi (N53) TOUR
63 12 870
Replacing ignition unit for left xenon
headlight
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore disconnect all components from voltage
supply before removal.
Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.
Slacken screws (1)
Release screws (2).
Pull out headlight (3) slightly in direction of arrow.
Installation:
Make sure headlight (3) is correctly seated in lower holder.
•
Adjust gap dimensions
•
Adjust headlights
Note:
Headlight shown removed for purposes of clarity.
Unlock catches (1) and remove cap (2) in direction of arrow.
Build date up to 02/05:
Turn ignition unit for xenon headlight (1) approx. 30
°
counterclockwise and detach.
Plug connection (2) is automatically released by turning ignition
unit for xenon headlight (2).
Lay plug connection (2) to one side.
Installation:
Make sure ignition unit is correctly engaged.
RA Replacing ignition unit for left xenon headlight
BMW AG - TIS
19.02.2013 13:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -