5 Series E61 535d (M57T2) TOUR
Release screws (1) and carefully detach control unit (2) towards
front.
Important!
Risk of damage to the contacts when removing and installing
the hydraulic unit.
Installation:
Keep sealing faces clean.
Replace screws.
Observe tightening sequence (1-4).
Tightening torque 34 51 1AZ
.
RA Removing and installing/replacing DSC control unit (M57TU 535d)
BMW AG - TIS
19.02.2013 00:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -