5 Series E61 535xi (N54) TOUR
11 14 010
Replacing vacuum pump sealing cover (N54)
Special tools required:
•
11 8 531
•
11 8 532
•
11 8 533
•
11 8 535
•
11 8 544
Necessary preliminary tasks:
•
Remove fan cowl.
•
Remove alternator drive belt.
•
Remove both drive belt tensioners.
Note:
For purposes of clarity, illustrations show alternator and servo
pump.
Secure special tool 11 8 531 with special tool 11 8 535 .
Twist out special tool 11 8 533 in direction of arrow until special
tool 11 8 532 is released from mounting.
Secure special tool 11 8 532 against falling down.
Position special tool 11 8 532 by hand on sealing cover.
Screw in special tool 11 8 544.
Note:
The sealing cover is pressed out diagonally during this work step
RA Replacing vacuum pump sealing cover (N54)
BMW AG - TIS
19.02.2013 00:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
