5 Series E61 535xi (N54) TOUR
Remove heat shield (1) in direction of arrow.
Note:
Carefully swing heat shield out in direction of arrow - risk of
damage!
Coolant feed pipe can be removed with heat shield.
Release screws (1).
Place retaining plate (2) on cylinder head cover.
Release screw (1).
Tightening torque: 11 42 4AZ
.
Detach oil feed line in direction of arrow.
Installation:
Replace O-ring.
Release screw (1).
Tightening torque: 11 42 5AZ
.
Release oil pressure line (2) if necessary with suitable pliers.
Important!
Do not position pliers on pipes - risk of damage!.
RA Removing and installing/replacing exhaust-gas turbocharger for cylinders 1-3 (N5
BMW AG - TIS
19.02.2013 00:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -