5 Series E61 535xi (N54) TOUR
Unlock cover (1) with slide (3). Release screws (2).
Remove cover (1).
Unlock all plugs (1) of DME control unit and disconnect.
If necessary, unlock control unit and raise approx. 5 cm.
Press locking tab (1) in direction of arrow and pull contact
carrier (2) out of housing.
Press locking tabs (1) in direction of arrow and pull contact
carrier (2) out of housing.
RA Replacing wiring harness section for ignition and injectors (N54)
BMW AG - TIS
19.02.2013 00:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -