5 Series E61 535xi (N54) TOUR
27 10 720
Replacing servomotor (ATC 300)
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Disconnect plugs (1 and 2).
Release screw (3) and turn resistor counterclockwise.
Tightening torque 27 00 14AZ
.
Release screws (1) and remove servomotor from transfer case.
Tightening torque 27 00 13AZ
.
RA Replacing servomotor (ATC 300)
BMW AG - TIS
19.02.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -