5 Series E61 535xi (N54) TOUR
52 14 023
Removing and installing / replacing drive for
left or right active seat
Necessary preliminary tasks:
•
Remove front seat
•
Remove seat cover with padding for front seat
Release screws (1), tip seat towards rear.
Installation:
Tightening torque 52 10 6AZ
.
Unclip hydraulic pockets (1) with supports on left and right from
flex mat.
Note:
If necessary, release clips (2). Remove hydraulic pockets (1)
from supports (3).
Feed hydraulic pockets (1) through flex mat towards bottom.
Detach retaining points for drive in area (4).
Disconnect plug connection.
Remove drive (1).
Note:
Drive and hydraulic pockets form a single unit and can only be
replaced completely.
RA Removing and installing / replacing drive for left or right active seat
BMW AG - TIS
19.02.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -