5 Series E61 535xi (N54) TOUR
Make sure electrical leads (5) are correctly routed.
Installation:
Observe the following work steps to adjust the correct gap
dimensions between decorative strips and airbag unit.
•
Fit steering wheel retaining plate (1) with decorative
strip (2) not yet screwed down on special tool 61 3 120 .
•
Tighten screws (3).
Unlock catch (1) and remove right multifunction steering wheel
switch (2) in direction of arrow from decorative strip (3).
RA Removing and installing/replacing multifunction steering wheel switch
BMW AG - TIS
19.02.2013 19:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -