5 Series E61 535xi (N54) TOUR
64 11 262
Removing and installing/replacing auxiliary
water pump
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Necessary preliminary tasks:
•
If necesary, remove intake filter housing.
•
Disconnect coolant hoses from auxiliary water pump.
Unlock fast-release couplings (1) and detach coolant hoses from
auxiliary water pump (4).
Installation:
Follow instructions for working on cooling system.
Fill and vent cooling system.
If necessary, release expander rivet (2).
Unfasten plug connection (3) and disconnect.
Installation:
Ensure correct routing of cables.
Remove auxiliary water pump (4) in direction of arrow.
RA Removing and installing/replacing auxiliary water pump
BMW AG - TIS
19.02.2013 21:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -