6 Series 630i (N52) Coupe
Unscrew nuts (1).
Tightening torque 18 20 1AZ
.
Remove retaining plate (2).
Unscrew nuts (3).
Tightening torque 18 20 1AZ
.
Release screws (1 and 2).
Tightening torque 18 20 2AZ
.
Take off holder (3).
Note:
Illustrations depict the left side - proceed in the same way for the
right side.
Unscrew nut (1).
Tightening torque 18 20 3AZ
.
Note:
Illustrations depict the left side - proceed in the same way for the
right side.
Unscrew nuts.
Tightening torque 18 20 4AZ
.
Modify grounding strap (1) during replacement.
RA Removing and installing complete exhaust system (N52)
BMW AG - TIS
15.01.2013 13:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
