6 Series 630i (N52) Coupe
18 40 050
Removing and installing/replacing front
exhaust manifold (N52)
Necessary preliminary tasks:
•
Remove reinforcement plate
•
Remove complete exhaust system
Note:
The oxygen sensors are in danger of being damaged when the
exhaust manifolds are removed and installed.
Remove control sensor from cylinders 1 to 3.
Remove monitor sensor from cylinders 1 to 3.
Unscrew nuts.
Remove exhaust manifold (1).
Installation:
Clean sealing faces, replace gaskets.
Replace nuts.
Tightening torque 18 40 1AZ
.
RA Removing and installing/replacing front exhaust manifold (N52)
BMW AG - TIS
15.01.2013 13:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
