6 Series 630i (N52) Coupe
Necessary preliminary tasks:
•
Disconnect battery
•
Remove front underbody protection
•
Remove reinforcement plate
Important notes on installation are described in this work step
•
Remove complete exhaust system
Remove heat shields (1) and (2).
Release nuts and remove heat shield (1) from expansion tank.
Release bolts to support transmission.
RA Removing and installing transmission (GS6S37BZ SMG) N52
BMW AG - TIS
15.01.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -