6 Series 630i (N52) Coupe
51 21 330
Removing and installing/replacing window
cavity cover strip on inner front door
Necessary preliminary tasks:
•
Remove front door trim panel
Important!
Cover strip comes in one part and runs up to bottom edge of
door.
Unclip clips (1 and 2).
Detach cover strip (3) in direction of arrow from front door.
Installation:
If necessary, replace faulty clips (1 and 2).
Detach cover strip (1) towards top.
Installation:
If necessary, replace faulty clips (2).
Installation:
Make sure inner cover strip (1) is in correct installation position in
relation to outer cover strip (2) and door window glass (3).
RA Removing and installing/replacing window cavity cover strip on inner front door
BMW AG - TIS
15.01.2013 17:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -