6 Series 630i (N52) Coupe
Build date after 09/2007:
Disconnect plug connection (1).
Release screws (4). Tightening torque
63 21 2AZ
.
Unlock retaining lug (5) and rear light (2) in direction of arrow
from bumper trim (3).
Installation:
Retaining lug (5) must not be damaged or missing.
Make sure wiring harness is correctly laid.
RA Removing and installing/replacing left or right rear light (on bumper trim)
BMW AG - TIS
15.01.2013 20:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
