6 Series 630i (N52) Coupe
64 11 213
Removing and installing/replacing heater -
A/C unit fan
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
•
Remove right glovebox with housing.
•
Remove bottom right instrument panel trim.
•
Remove storage compartment.
•
Remove audio system controller /
remove Car Communication Computer.
Release screws (3) and (4).
Remove middle function carrier (5) in direction of arrow.
Installation:
Make sure middle function carrier (5) is correctly seated.
Ensure correct cable routing.
Disconnect left air duct (1) in direction of arrow (2) and (3).
Installation:
Make sure right air duct (1) is correctly seated.
Disconnect right air duct (1) in direction of arrow (2) and (3).
Installation:
Make sure right air duct (1) is correctly seated.
RA Removing and installing/replacing heater - A/C unit fan
BMW AG - TIS
15.01.2013 21:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -