6 Series 630i (N53) Coupe
Slide locking clip (1) in direction of arrow.
Turn door window glass (3) and feed towards top rear out of
guide rail (2).
Installation:
Adjust door window glass.
Installation:
Sliding block (1) must be correctly positioned in guide (2).
Clamping plate (4) must be correctly engaged with shim (3) on
door window glass (5).
Replacement:
Lever out catch (2) from shim (4) and remove with clamping
plate (3) from door window glass (1).
Lever out catches (5) and remove clamping plate (3) from
shim (4).
Installation:
Catches (2 and 5) must not be damaged.
RA Removing and installing/replacing door window glass, front left or right
BMW AG - TIS
17.01.2013 16:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -