6 Series 630i (N53) Coupe
If necessary, unclip protective caps upwards.
Release screws (3).
Installation:
Replace microencapsulated screws.
Tightening torque 52 10 1AZ
.
Move seat runners forward so that they are flush.
Unlock lock (1) and disconnect plug connection (2).
Important!
Cover door sill with protective covers (risk of damage).
Lift out front seat.
Installation:
Carpet must not get between seat rails and floor pan in area
of fastening points (grating noises).
Tightening torque 52 10 1AZ
.
RA Removing and installing left or right front seat (normal/electric)
BMW AG - TIS
17.01.2013 17:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -