6 Series 630i (N53) Coupe
66 54 010
Removing and installing complete night
vision camera (up to build date 09/2007)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove front bumper trim
Disconnect plug connection (1).
Remove line for washer jet (2).
Release screws (3) and remove holder (4) with camera.
Tightening torque 66 54 1AZ
.
After installation:
•
Fill up with washer fluid
Replacement only:
•
Replace night vision camera
RA Removing and installing complete night vision camera (up to build date 09/2007)
BMW AG - TIS
17.01.2013 19:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -