6 Series 645Ci (N62) Coupe
11 00 050
Removing and installing engine (N62)
Special tools required:
•
11 0 020
Necessary preliminary tasks:
•
Disconnect battery negative lead. (Follow instructions for
disconnecting and connecting battery).
•
Lift engine hood into assembly position.
•
Remove radiator design cover.
•
Remove air cleaner housing.
•
Remove tension strut.
•
Remove fresh air duct.
•
Detach steering spindle from steering gear.
•
Release engine wiring harness from electronics box.
•
Drain coolant.
•
Remove coolant expansion tank.
•
Remove radiator.
•
Remove A/C compressor drive belt.
•
Remove alternator drive belt.
•
Disconnect fuel line.
•
Remove front/middle underbody protection.
•
Remove reinforcement plate.
•
Remove all lambda oxygen sensors.
•
Remove exhaust system.
•
Remove transmission.
RA Removing and installing engine (N62)
BMW AG - TIS
18.01.2013 05:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
