6 Series 645Ci (N62) Coupe
Note:
At narrow points, use a socket with 3/8" drive and a short
extension.
Slacken off cylinder head bolts by one turn in
sequence 10 ... 1.
Rotate eccentric shaft at dihedral head as shown in illustration and
hold in this position.
Remove cylinder head bolt (7).
Rotate eccentric shaft at dihedral head as shown in illustration
back to minimum stroke position.
Remove remaining cylinder head bolts.
Lift off cylinder head.
Lift off cylinder head gasket.
RA Removing and installing right cylinder head (N62 to 9/03)
BMW AG - TIS
18.01.2013 05:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -