6 Series 645Ci (N62) Coupe
11 13 020
Removing and installing/replacing oil sump
bottom section (N62/N62TU)
Necessary preliminary tasks:
•
Remove reinforcement plate
•
Remove oil drain plug and drain engine oil.
Unlock plug connection (1) on oil level sensor and disconnect.
Release screws and remove oil sump bottom section (2).
Tightening torque 11 13 2AZ
.
Installation:
Clean sealing surfaces.
Replace seal.
Replace screws.
When replacing oil sump bottom section:
Convert oil level sensor.
Replace sealing ring.
RA Removing and installing/replacing oil sump bottom section (N62/N62TU)
BMW AG - TIS
18.01.2013 05:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
