6 Series 645Ci (N62) Coupe
Note:
Radial shaft seal may only be supported with a "support sleeve".
If the radial shaft seal (1) is stored for longer than six months
without the support sleeve (2), its operational reliability can no
longer be guaranteed and it must not be reused.
Important!
The sealing lip of the radial shaft seal is highly sensitive and
must not be kinked under any circumstances.
Do not touch the sealing lip with your fingers.
Remove support sleeve (2) from radial shaft seal (1).
Fit radial shaft seal (1) on timing case cover.
Using special tool 11 9 420 and central bolt (3), install radial
shaft seal flush with timing case cover.
RA Replacing radial shaft seal in timing case cover at bottom (N62/N62TU)
BMW AG - TIS
18.01.2013 05:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
