6 Series 645Ci (N62) Coupe
11 24 571
Replacing all conrod bearings (N62/N62TU)
Special tools required:
•
00 2 590
•
00 9 120
•
11 2 110
(piston removed)
Important!
Note grinding stages on crankshaft
The letter (1) denotes the crankshaft construction stage.
The numbers (2) denote the bearing shell classification for the
relevant bearing position from 1 to 5 (main bearing cap).
Install new conrod bearing shells.
Insert one red and one blue bearing shell for each conrod.
Install piston.
RA Replacing all conrod bearings (N62/N62TU)
BMW AG - TIS
18.01.2013 05:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -