6 Series 645Ci (N62) Coupe
Installation:
Replace O-rings (1 and 2) on solenoid valve (3) and lubricate.
Installation:
Press in solenoid valves as far as they will go.
Make sure holders are in correct installation positions.
Install and tighten down screws.
Now clear the fault memory.
RA Removing and installing/replacing both right solenoid valves (N62/N62TU)
BMW AG - TIS
18.01.2013 05:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -