6 Series 645Ci (N62) Coupe
Lubricate bearing shells (1) with engine oil.
Cylinder bank 5 to 8:
Important!
The machined curvature (1) of the eccentric points inwards.
Install eccentric shaft as shown in graphic.
Lubricate bearing shells (1) with engine oil.
Install bearing shells (1).
Bearing shells (1) must snap audibly into place.
Check correct position of bearing shells (1).
RA Removing and installing/replacing left eccentric shaft (N62 from 9/03 and N62TU)
BMW AG - TIS
18.01.2013 05:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
