6 Series 645Ci (N62) Coupe
Remove special tools 11 9 472 and special tools 11 9 475 .
Ends of compression rings (1) point upwards.
Make sure compression rings (1) are engaged at ends.
Important!
Rocker arms (1) slip slightly when bearing bracket is fitted.
Make sure rocker arms (1) are secured as illustrated on
hydraulic valve clearance compensating elements and on
valves.
Align rocker arms (1) straight.
Remove special tool 11 9 473 .
Remove bearing bracket (1) from special tool 11 9 470 .
RA Removing and installing/replacing right intermediate lever (N62 to 9/03)
BMW AG - TIS
18.01.2013 05:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
