6 Series 645Ci (N62) Coupe
11 43 000
Removing and installing/sealing guide tube
for oil dipstick (N62)
Necessary preliminary tasks:
•
Remove intake air manifold.
•
Drain engine oil.
Note:
For purposes of clarity, this work step is shown on the engine after
it has been removed.
Unlock and detach vacuum line (1).
Release screws and remove check valve (2).
Remove guide tube (3) upwards.
Installation:
Replace sealing ring on guide tube.
Apply light coat of oil to seal.
Replacing sealing ring on check valve pipe.
Apply light coat of oil to seal.
Assemble engine.
Check engine for leaks.
RA Removing and installing/sealing guide tube for oil dipstick (N62)
BMW AG - TIS
18.01.2013 06:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
