6 Series 645Ci (N62) Coupe
12 90 100
Replacing fan for electronics box (N62)
Necessary preliminary tasks:
•
Switch off ignition.
•
Follow instructions for disconnecting and connecting battery.
•
Disconnect battery ground terminal.
•
Remove right fresh air duct.
Important!
Follow instructions for removing and installing electronic
control units.
Release screw (2).
Remove cover (1) of equipment box in direction of arrow towards
right.
Installation:
Push on cover (1) of equipment box in direction of arrow towards
left into holder (3).
Disconnect plug connections (1 to 6).
Remove Valvetronic control unit, DME and integrated supply
module.
Unlock plug connection (3) on fan for electronics box and
disconnect.
Release screws (1) on control unit carrier (2).
Remove control unit carrier (2) towards top.
RA Replacing fan for electronics box (N62)
BMW AG - TIS
18.01.2013 06:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
