6 Series 645Ci (N62) Coupe
12 41 020
Removing and installing/replacing starter
motor (N62)
Necessary preliminary tasks:
•
Disconnect battery ground terminal.
•
Remove right exhaust manifold.
Release screws and nut on heat shield (1) (see arrows).
Remove heat shield (1).
Installation:
Tightening torque: 12 41 6AZ
.
Disconnect plug connection (1) term.50.
Unscrew nut (2).
Installation:
Tightening torque 12 41 4AZ
.
Remove starter cable (3) term.30.
Release screws on transmission (see arrows).
Installation:
Tightening torque 12 41 1AZ.
RA Removing and installing/replacing starter motor (N62)
BMW AG - TIS
18.01.2013 06:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -