6 Series 645Ci (N62) Coupe
-
Servomotor on intake air manifold
-
Pulse generator on left exhaust and inlet camshafts
-
Left eccentric shaft sensor
Unfasten screws.
Remove brackets (4), place cable ducts to one side.
Recycling
Fuel escapes when fuel line is detached. Catch and dispose
of escaping fuel.
Observe country-specific waste-disposal regulations.
Remove protective cap from compressed air connection (1).
Blow fuel back into tank with a short blast of compressed air (max.
3 bar) at compressed air connection (1).
Unfasten screws.
Remove both injection pipes (2) towards top.
RA Replacing complete injection pipe (N62, N62TU)
BMW AG - TIS
18.01.2013 06:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
