6 Series 645Ci (N62) Coupe
23 42 012
Replacing expansion tank GS6S53BZ (SMG)
Note:
After completing work:
-
Check fluid level in hydraulic system by means of DIS Tester
"Service Function"
-
Perform "Teach in transmission" service function by means
of DIS Tester
Necessary preliminary tasks:
•
Disconnect battery
•
Remove underbody protection
•
Release exhaust system at front and lower
•
Remove heat shields
•
Support transmission and release transmission cross-
member
•
Lower transmission
Release screws (1).
Tightening torque 23 41 7AZ
.
Remove expansion tank (2) in direction of arrow.
Installation:
Replace sealing ring.
Moisten sealing ring (1) with Pentosin and push onto tank fitting.
RA Replacing expansion tank GS6S53BZ (SMG)
BMW AG - TIS
18.01.2013 06:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
