6 Series 645Ci (N62) Coupe
41 14 502
Replacing rear left outer wheel arch section
(rear left side panel removed)
Read contents of Body, General.
Refer to texts on KSD CD (flat rate number 41 14 502)
for details of stripping and rigging tasks.
Spot-weld bonding is used on this vehicle. Observe
specific procedure.
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, outer, rear
-
(2) Reinforcement, C-pillar, inner
Mark severance cut in accordance with measurement a and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 280 mm from roof edge.
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
18.01.2013 09:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
