6 Series 645Ci (N62) Coupe
Mark severance cuts in accordance with specified measurements and cut.
Measurement a = approx. 430 mm before hole dia. 20 mm.
Measurement b = approx. 180 mm below roof edge.
Important!
Only cut outer metal plate on both severance cuts.
Open weld joints in areas (1) and (3).
Installation:
Weld in reinforcing panels at all severance cuts.
Apply window glass adhesive to cavity acoustic baffle (2).
Bond and rivet new part in area (3).
Use Hemlock 813 blind rivet (sourcing reference: BMW Parts Service picture board - Aluminium and
steel/bonding and welding).
Double number of rivets with respect to welding spots in area (3).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
18.01.2013 09:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -