6 Series 645Ci (N62) Coupe
Interior view of front side panel.
Remove screws and nuts.
Installation:
Screw tightening torque 41 35 1AZ
.
Nut tightening torque 41 35 2AZ
.
Installation:
Slacken screw (1) to adjust side panel in relation to A-pillar.
Turn spacer sleeve with special tool 41 1 110 .
Important!
Do not damage adjoining body parts.
Tighten screw (1).
Tightening torque 41 35 1AZ
.
RA Removing and installing/replacing side panel, front left or right
BMW AG - TIS
18.01.2013 09:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -