6 Series 645Ci (N62) Coupe
Release expander rivet (1) on bumper trim (2).
If necessary, release expander rivet (1) on guide (2).
Unclip guide (2) with special tool 00 9 317 from bumper
trim (3).
Release screws (1) on bumper trim (2).
Unclip bumper trim (2) to side panel outwards.
Remove bumper trim (2) towards rear with aid of a 2nd person.
RA Removing and installing rear bumper trim
BMW AG - TIS
18.01.2013 09:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -