6 Series 645Ci (N62) Coupe
51 16 210
Removing and installing/replacing trim for
preselector lever (gearshift lever)
Special tools required:
•
00 9 341
Necessary preliminary tasks:
•
Apply parking brake
•
Version with automatic transmission: Move selector lever into
N position
•
Version with manual transmission: Engage neutral
Note:
Removing the trim for the preselector lever or gearshift lever is
virtually identical.The illustrations show the removal of the trim for
the preselector lever in versions with automatic transmissions.
Important!
Do not shear off turning lock of selector lever knob (1).
Therefore do not twist selector lever knob (1) when
removing.
Pull off selector lever knob (1) with a forceful jerk.
Press sides of selector lever cover (2) together and feed out
towards top.
Unclip trim for preselector lever (4) with special tool 00 9 341
from mounting points (3).
RA Removing and installing/replacing trim for preselector lever (gearshift lever)
BMW AG - TIS
18.01.2013 09:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
